Cable / Coax Support
Back to Product Index
Item # |
Description |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| IBK8DB - 8 Ft. Direct Burial Kit IBK8SP - 8 Ft. Shoe Post Kit IBSPAK - Shoe Post Angle Kit IBK10DB - 10 Ft. Grip Strut Direct Burial Kit IBK10SP - 10 Ft. Grip Strut Shoe Post Kit IB8 - Ice Bridge 8’ Section IB22 - Ice Bridge 22° IB45 - Ice Bridge 45° IBC - Ice Bridge Cantilever IBCKDB - Ice Bridge Direct Burial Cantilever Kit IBTK1 - Trapeze Kit Single Tier |
Our 8 Ft. Ice Bridge Kit is the standard size coax bridge and comes with one 8 ft X 24” wide straight section, two sets of trapeze kits, a cantilever, one post and one cap. 10 Ft. Grip Strut Ice Bridge kits also available for heavier duty applications. Both are available in Direct Burial, Shoe Post and the Shoe Post Angle. Convert any length Direct Burial Post to a shoe post with the Shoe Post Angle Kit. The angle is attached to the foundation (attachment hardware not included) and the post is secured to the angle with two u-bolts, included. Order additional lengths and components as needed to extend and customize the Ice Bridge run according to site requirements. Add straight sections to the Ice Bridge kit for continuous runs of stable coax support, available in 2 ft, 4 ft., and 8 ft. lengths. Ice Bridge Wedges are used to add bends to an Ice Bridge run; available in 22.5° and 45°. Add a Trapeze Kit for every 4 ft. of additional Ice Bridge run in order to maintain consistent support for coax cable. Add Cantilever Kits where necessary to end the run. All hot-dipped Galvanized Steel. |
    |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WG4 - 4-Hole Waveguide Bracket
WG7 - 7-Hole Waveguide Bracket WG12 - 12-Hole Waveguide Bracket |
Our Waveguide Brackets are made of heavy 2" X 1/8" channel punched with 3/4" holes for snap-in hangers, 7/16" holes for bolt-on hangers, and 7/16" slots for mounting the brackets. These brackets can be mounted to walls and towers, hardware sold separately. |  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COMST10 - 10' Comstrut WGUNI - 10' Unistrut |
Galvanized Comstrut supports coax cable and ground conductors with bolt-on and snap-in hangers with a 1/8" hole for self-drillling screws.Galvanized Unistrut is available in 10 ft. lengths and can be field cut for a flexible support system. PVC End caps for both are also available. |  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WGL8H10 - Cable Ladder 8-Hole ( 10' section ) WGL8H20 Cable Ladder 8-Hole ( 20' section ) WGL12H10 Cable Ladder 12-Hole ( 10' section ) WGL12H20 Cable Ladder 12-Hole (20' section) |
Our Cable Ladder is an industry standard for adding coax runs to towers. Available in 8 and 12 run units and in 10 ft. and 20 ft. sections. Comes with attachment hardware for angle leg tower. |  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MPWGSO12 12-Hole MPWGSO6 6-Hole |
Monopole Waveguide Stand-Off Brackets are used to support coax cable along a monopole. Punched with 3/4" holes for snap-in hangers, 7/16" holes for bolt-on hangers and 7/16" holes for mounting, the brackets are available in 12-hole and 6-hole configurations. |  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WTWGSO12 12-Hole WTWGSO7 7-Hole |
Water Tank Waveguide Stand-Off Brackets are used to support coax cable along a water tank or building with 4" standoff. Punched with 3/4" holes for snap-in hangers, 7/16" holes for bolt-on hangers and 7/16" holes for mounting, the brackets are available in 12-hole (~ 45") and 7-hole (~ 30") configurations. |  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WGTB | The Waveguide T-Bracket is designed to clamp on pipe up to 5" OD and support up to 15 coax lines with snap-in hangers, sold separately. Convenient for converting a vertical run to horizontal and vice versa. |  |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Aluminum Cable Tray
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
