• Home
  • About Us
  • Products
  • Custom Fabrication
  • Services
  • Certifications
  • How to Order
  • Open an Account
  • Contact Us

Rooftop and Water Tank Mounts

Back to Mounts Index


Item #
Description
RMA12 - 12' 6"

RMA14 - 14'

RM184 - Rubber Matting		 The Non-Penetrating Roof Mounts (aka Sled Mounts)are uniquely adjustable to rooftop slopes of up to 5° in all directions while keeping the face level and antenna mounting pipes plumb. Used where intrusive mounting techniques are not practical or permitted. Secured by blocks and cushioned by rubber mats (requires four 18” x 4’ mats, sold separately). Available in 12’6” and 14 ft configurations, both accept up to 4 pipe mounts, sold separately as listed below, or see page 6 for pipe mount kits. Blocks not available.
RT1200 - Tripod

RT1201M - 6' Mast

RT1202M - 8' Mast

RT1203M - 10.5' Mast 		Tripod Mounts may be bolted to any flat surface. Choose from various 2 3/8” OD pipe mount lengths to clamp base unit according to antenna height needed. Consult local codes and wind conditions for tie-down requirements.
RMTBM The Tripod Ballast Mount Attachment provides the Tripod Mount (sold separately, see above) with ballast supports and rubber matting (also sold separately, above) for a safe and stable non-penetrating application.
RMTSM-9 - for 9 Antennas

RMTSM-12 - for 12 Antennas 		Our NEW Tri-Sector Rooftop Mount provides a full 9 or 12 antenna sector array in one convenient and stable non-penetrating rooftop mount. Use with rubber matting (sold separately) and blocks (by others) to secure safely. Assembles quickly. Face is 13’6” and overall height 12’. Call us for alternate configurations on this style of mount - we can custom fabricate your mount to order. Please allow additional lead time for all custom orders.
WTRM The Water Tank Roof Mount is designed to be used on virtually all water tank tops due to the adjustable sliding bracket that accommodates for the pitch. 8” X 8” feet allows for stud-welding to the tank top. Ask us about our NEW Adjustable Mounting Feet!
WTSOM The Water Tank Stand-Off consists of two mounting brackets that provide 6” of stand-off with three slotted holes for attachment and a 2” X 6’ mounting pipe.