Site Hardware

Back to Product Index

Item #

Description

CSK3

The 3" Clamp Set is made of 3/8" x 1 1/2" flat stock and accomodates pipes ranging from 3/4" to 3" OD and comes with 1/2" x 10 " threaded rod.

CSK5

The 5" Clamp Set is made of 1/2" x 2" flat stock and works for pipes ranging from 3/4" to 5" OD and include s 5/8" x 16" threaded rod and related hardware.

CSWX

The Welded Cross Clamp Set is a unique and versatile design with two welded clamp shells in a 180° cross over configuration with 1/2" all thread and 3" clamp shells. It will allow for the mounting of two pipes up to 3" OD. When properly anchored it can be used as a wall mount.

XO2X3

2X3 Cross Over Plate allows for pipe-to-pipe connections when used with U-bolts (sold separately). The plate accepts 1 1/2" to 2 1/2" pipe on one side and 1 1/2" to 2 1/2" OD pipe on the other.

XO2X4

The 2X4 Cross Over Plate accepts 1 ½" to 2 1/2" pipe on one side and 1 1/2" to 3 1/2" OD pipe on the other.

SH12 - ½"
SH78 - 7/8”
SH114 - 1 ¼"
SH158 - 1 5/8"

Snap-In Line Hangers are industry standard for securing coax - comes in packs of 10.

BH12 - ½"
BH78 - 7/8"
BH114 - 1 ¼"
BH158 - 1 5/8"

Butterfly Hangers, also known as Bolt-On Line Hangers , are industry standard for securing coax - comes in packs of 10.

HGL12 - 1/2”
HGL78 - 7/8”
HGL114 - 1 1/4"
HGL158 - 1 5/8"

Hoisting Grips are prelaced and available in the most common sizes.

AAU

AA38

Angle Adapters are available in Universal and 3/8" configuration - comes in packs of 10.

Universal Stand-Off Adapters are available in 2-3" and 3-4" configurations - comes in packs of 10. (not shown)

BC001 - Tensioning Tool

BC204B9 - 1/2" Banding

BC25499 - Buckles for 1/2" Banding

Steel Banding is made of quality 201 Stainless Steel and comes in convenient 100' rolls in a plastic dispenser/tote. It is easy to use yet rugged and very durable. We stock the ½” band (Blue) along with the corresponding attachment clips and the tensioning tool.

HTS114

HTS34

Tek Screws available in two sizes: 1 1/4" and 3/4" (3/4" is commonly used for securing Cable Tray).

HBC12

HBC38

Beam Clamps are available in 1/2" and 3/8"; Galvanized.

HUG(galv)

Several sizes of U-Bolts available. All listed in OD:

3/8” X 2”		1/2” X 2 ”
3/8” X 2-1/2”		1/2” X 2 1/2”
3/8” X 3”		1/2” X 3”
3/8” X 3 1/2”		1/2” X 3 1/2”
Call for more sizes!

HTR

Threaded Rod is available in 3/8”, 1/2”, 5/8”, 3/4” diameters and can be cut to any standard length.

We also carry hexbolts, nuts, flats, etc for 3/8", 1/2", 5/8", and 3/4" in stainless and galvanized.

CALL 856-317-0005 for more!