Tower Mounts

Back to Mounts Index

Item #	Description
TW1011 - 12'6" Stand-off TW1021 - 14' 6" Stand-off	The Universal Stand-Off Antenna Sector Frames provide 24" of stand-off for narrow faced towers and adapt to straight or tapered towers. Adjustable down-tilt is provided. Used with Universal Saddle Mounts (see below), they adapt to round or angle tower legs. Available in 3 antenna and 4 antenna as well as 12' 6" and 14' 6" configurations.
TW1116 - 12' 6" Low Profile TW1126 - 14' 6" Low Profile	Similar to the Stand-off Frames, Universal Low Profile Antenna Sector Frames serve where the tower face is wide enough to provide sufficient room for the required sectors. They will mount to round or angle tower members when used with Universal Saddle Mounts. They adapt to straight or tapered towers and feature adjustable down-tilt. Available in 3 antenna and 4 antenna as well as 12' 6" and 14' 6" configurations.
SM-2 2 Ft. SM-4 4 Ft.	The Side Arm Mounts are made to fit 2” to 8” tower legs and provide either a 2 Ft. or 4 Ft. stand off from the tower. Both sizes are adjustable for straight or tapered towers. Attach with U-bolts, sold separately.
TW1120	The Universal Saddle Mount allows pipe mounts to be mounted to angle or round member tower legs. An adaptor plate is included to use with 60° or 90° angle members. Hardware for mounting Pipe Mounts is included.
HBKT	The H-Bracket Dual LNA Mount allows for mounting multiple antennas or LNA's to the same mounting post as the antenna. It provides two 2" x 12" mounting pipes welded 18" apart on a 2" x 2" x 1/4" angle. The angle has two 9/16" slots for U-bolts that accomodate mounting to round members 2" to 8" in OD. U-bolts sold separately.
CM4-6	The Cluster Mount provides three mounting pipes to mount to a 4” to 6” pipe or tower leg for a close set antenna array. Used where space is limited and maximum coverage is required. Call for other mounting requirements.
TW1092 2 3/8" X 60" TW1094 2 3/8" X 72" TW1096 2 3/8" X 96" TW1098 2 3/8" X 126"	Tower Frame Pipe Mount attach to any 3 1/2” OD pipe to provide antenna mounting. The pipe mount OD is 2 3/8”. Typical applications include T-Frames and Monopole Platforms. Several different pipe lengths are offered.