Wall Mounts

Back to Mounts Index

Item #	Description
WMFSD Standard Duty WMFSD-BK SD Backer Kit WMFHD Heavy Duty WMFSD-BK HD Backer Kit	The Flush Wall Mounts provide a 2” X 6’ pipe to be mounted to a wall with minimal stand-off. The mounting brackets are anchored to the wall by four anchors (not included). It may also be anchored through the wall with 5/8” threaded rod and backer plates (sold separately). Optional Flush Wall Mount Backer Kit comes with 3” X 3” X 1/4” angle, 18” X 5/8” threaded rod and related hardware for secure attachment through walls up to 14” thick. Can be used with standard duty and heavy duty wall mounts. Also available in Heavy Duty, the Heavy Duty Flush Wall Mount Kit is constructed with heavier angles to support a larger load on the 6’ X 2” Pipe. Call for larger pipe requirements. Optional Backer Kit available for extra support.
WMC WMC-BK Backer Kit	Corner Wall Mounts provide a 2” X 6’ pipe to be mounted to the corner of a building. The mounting brackets are attached to the wall by four anchors (not included). It may also be anchored through the wall with 5/8” threaded rod and backer plates (sold separately). Bracket hardware is included.
WMSO12	The Stand-Off Wall Mount provides a minimum of 12” stand-off from the wall, one slotted hole for attachment and a 2” X 6’ mounting pipe.
WMA WMA-BK Backer Kit for Angle Wall Mount	The Angle Wall Mount is used for single antenna or face frame mounting and can be either through-bolted or wall-anchored. The 8” X 8” X 3/8” angle mount can be used as a single mount or doubled up for heavy duty applications; can accept 2” or 3” pipe, sold separately. Backer plate kit, anchoring hardware and U-bolts, shown, sold separately.