WiFi, GPS, and BTS Mounts

Back to Mounts Index

Item #	Description
WFM-WC10 - 10' Welded Construction WFM-BC10 - 10' Bolted Construction WFM-BC360 - 10' Bolted 360° Array	NEW PRODUCT!!! Our new Wi-Fi Mounts allow full sector arrays to mount just about anywhere; combine with wall mounts, clamp sets, saddle mounts, etc. for a variety of options. Available in both all-welded and bolted modular construction. A full 360° array (shown) is also available in the bolted construction. Designed for, but not limited to, Motorola's Canopy Antennas. International Tower Supply's EXCLUSIVE DESIGN!
WFM-TM - Top Mount WFM-BM - Bottom Mount (not shown)	The Wi-Fi Bracket Mounts bolt to any 2 3/8” OD pipe for optimum flexibility in mounting applications. Both mounts feature 60° of separation, the WFM-TM has 8” of stand-off on 1” X 7” pipe mounts, and the WFM-BM has 12” of stand-off on 1 1/4” X 8” pipe mounts.
GPSWM	The GPS Wall Mount is designed to accept non-threaded GPS antennas. The 4 ft x 1 5/16” OD mast stands off of the wall 6 inches. Four 7/16” slotted holes on the 8” X 8” wall plate allows adjustment of the mast to plumb the antenna. Mounting hardware not included.
GPSUM - Universal GPS Mount CSK5 - 5" Clampset for Angle/Pipe	The Universal GPS Mount is perfect for temporary or permanent mounting for a non-threaded GPS antenna on a 4 Ft. x 1 1/4” mast. Mount can be secured to any pipe from 1 1/2” up to 4 inch diameter as well as angle members or walls. Please specify extra clamp set (CSK5) for pipe/angle mounting.
GPSBM	The GPS Bracket Mount is a lightweight and versitile mount that supports a single GPS, Wi-Fi, or other small antennas (1 5/8” OD) and u-bolts to 1” to 3” pipe. U-bolts sold separately. ALSO FOR WIFI!
GPSMPK	The GPS Mount is designed for monopole, water tank, and wall mounting applications by stud welding, welding, or bolt-on applications. Attachment hardware sold separately.
BTS2L - 2 Legged BTS4L - 4 Legged BTSWM - Wall Mount	2-Leg BTS Mount The 2-Leg BTS Mount mounts to both a wall and floor for stable BTS mounting. Fabricated with heavy 5” X 3” X 1/4” angle with NEW bolt on angle legs with 8” X 8” footings. Dimensions: 50 3/8” D X 44” W X 24” H. 4-Leg BTS Mount The 4-Leg BTS Mount is similar to the 2-leg only it is attached to the floor for stable BTS mounting anywhere. Fabricated with heavy 5” X 3” X 1/4” angle with NEW bolt on angle legs with 8” X 8” footings. Dimensions: 50 3/8” D X 44” W X 24” H. BTS Wall Mount The BTS Wall Mount is a shelf-like design for wall mounted BTS cabinets. Fabricated with heavy 5” X 3” X 1/4” angle. Dimensions: 51 1/4”D X 30”W